Description
BigShot Throwline (B1ABSET1027)
Crossed From:
BS-1/FG-4/FG-4F Wall Safety Products
BS1/FG4/FG4F Wall Safety Products
BS1FG4FG4F Wall Safety Products
FG-BS-KIT1 Jameson
FG-TS-KIT1 Jameson
FGBSKIT RBI
FGBSKIT1 Jameson
FGTSKIT1 Jameson
SET1027 Sherrill Tree
SW14970 A&I
1027 Buckingham
1027 Buckingham
Specifications:
The BIGshot has been redesigned and is more accurate and 25% lighter than before!
Thanks to computer-aided design (CAD), Jameson was able to reduce excess bulk and weight from the head assembly while keePing the same wide-fork dimension that has made this such a popular throwline accessory.
While they were at it, Jameson redesigned the launch pad to reduce in-air projectile rotation by 50%, greatly improving accuracy (also available as a sling replacement for older models).
Jameson improved the leading and most effective means of accurately launching a throw weight into tree canopies and over targets up to 200 feet.
Instructions for replacing Throwline BIG SHOT Pouch with Tubing:
Dimension A (1) Put the Big Shot head in a table mounted vise with cushioning to avoid bending the base pipe.
Dimension B (2) Hold the tubing by the ends, letting the pouch relax below and remove any twist in the sling prior to the next step.
Dimension C (3) Wet the Big Shot arms with soapy water (use very little soap), then dampen the inside of the tubes.
Dimension D (4) Slide ends of the sling onto the Big Shot arms about an inch or so.
Dimension E (5) IMPORTANT STEP - Milk the sling on to the arms one at a time with a pushing motion (hands must be dry). Try not to twist the sling end, but push it onto the arm with one hand and pull the leading end with the other hand.
Dimension F (6) If the pouch is warped, twist the sling ends while still damp. Give the sling one good pull to set it, then let it dry for 6-8 hours before using the Big Shot.
This is a special order item. Special order items can take up to 3 to 5 additional days to arrive. If you have any questions regarding availability or processing time, please email us at [email protected].